
Main, emergency off and repair switchesmore +
A manually operated main switch must be provided for each mains feed in order to disconnect the machine's electrical equipment from the mains (e.g. when work on the electrical equipment is to be done)...
D series main / emergency off switchesmore +
At every control point and workplace where an emergency-off function is required, such devices must be present. They must mechanically snap into place automatically and be positioned where they can be easily reached...
VN series main / emergency off switchesmore +
VN series main / emergency off switches
DL series main / emergency off switchesmore +
DL switches fulfil the circuit-breaking conditions as per EN for 1000V. The terminals have individual terminal clamp covers for cable lug and power bus connection on the mains input side. The DHV twin-lever handle has a locking...
Repair switchesmore +
The repair switch is an enclosed main switch with an emergency-off function for an individual electrical consumer. Its installation in the immediate vicinity of the motor or of the electrical consumer unit enables each worker...
Motor switches with CEE plug and low-voltage circuit breakermore +
Taken into the account in the design of these devices are the VDE provisions of DIN EN 60204 Part 1, section 7.5 (protection against automatic restarting when power is restored following a power cut).
S series main / emergency-off switch with low-voltage circuit breaker more +
Elektra S series main switches with a low voltage circuit breaker provide protection against automatic restarting when power is restored following a power cut. They fulfil the requirements of DIN EN 60204 Part 1, clause 7.5 ...